1.1 Key applications

• Limited RFID CARD use tickets for public transport
• Limited use tickets for event ticketing

1.2 Contactless energy and data transfer
MF0ICU1 is connected to a coil with a few turns. The MF0ICU1 fits the TFC.0 (Edmondson) and TFC.1 (ISO) ticket formats as defined in BS EN753-2.
TFC.1 format tickets are supported by the MF0ICU10 chip which features a 17 pF on-chip resonance capacitor.
The smaller TFC.0 format tickets are supported by the MF0ICU11 chip which features a 50 pF on-chip resonance capacitor.
1.3 Anticollision
An intelligent anticollision function enables simultaneous multicard operation. The anticollision algorithm individually selects each card and ensures correct execution of a transaction with the selected card without data corruption from other cards in the field.
1.3.1 Cascaded Unique IDentification (UID)
The anticollision function is based on an IC individual serial number called Unique Identification (UID) for each IC. The UID of the MF0ICU1 comprises 7 bytes and supports ISO/IEC 14443-3 cascade level 2.
1.4 Security

• 7-byte UID in accordance with ISO/IEC 14443-3 for each device
• 32-bit user definable One-Time Programmable (OTP) area
• Field programmable read-only locking function per page

1.5 Delivery options
MF0ICU1 can be delivered in packaged or wafer form. Refer to delivery type description for more information.
Features and benefits
2.1 MIFARE RF interface ISO/IEC 14443 A

• Contactless transmission of data and supply energy (no battery needed)
• Operating distance up to 100 mm depending on antenna geometry
• Operating frequency of 13.56 MHz
• Data transfer of 106 kBs
• Data integrity of 16-bit CRC, parity, bit coding, bit counting
• Anticollision
• 7-byte serial number in accordance with ISO/IEC 14443-3 cascade level 2
• Typical ticketing transaction time of < 35 ms
• Fast counter transaction time of < 10 ms

2.2 EEPROM

• 512-bit, organized in 16 pages with 4 bytes per page
• Field programmable read-only locking function per page
• 32-bit user definable One-Time Programmable (OTP) area
• 384-bit user Read/Write area (12 pages)
• Data retention time of 5 years
• Write endurance 10000 cycles

This technology rfid inlay by free contact and in the light of the radio frequency identification (RFID), by philips semiconductor (now en pu semiconductors), nokia and SONY joint research and development, it is based on RFID and interconnection technology. NFC is a short-range hf radio technology, run the 13.56 MHz frequency within 20 cm distance. The transmission speed is 106 Kbit/SEC, 212 Kbit/SEC three or 424 Kbit/SEC. The near field communication has passed into the ISO/IEC IS 18092 international standards, EMCA - 340 standard and ETSI TS standard 102-190. NFC using both active and passive reading mode.